Usually ships in 2-3 business days. Fill out a quote request and we'll check backorder status!
COLORstrip is an LED-fitted strip fixture. The unit can be controlled via four DMX channels, multiple modes accessible via the control panel, or an optional LED-FS1 controller.
The COLORstrip features built-in programs with automatic and sound-active triggers, and allows access to popular preset RGB mixed colors: yellow, purple, cyan and white. The fixture is equipped with pre-programmed flash, color chase, sequential color chase, color mixing and color fade patterns.
Jacking the COLORstrip into a DMX controller gives the programmer access to all pre-programmed features as well as to speed adjustments for fade and flash. At 38 inches long, 2.5 inches wide (96.5cm x 6.4cm),and weighing less than 5 pounds (2.05kgs), it is ideal for creating “runway” effects without cluttering up the catwalk.
In the Box:
- (1) COLORstrip
- (1) IEC Power cable
- (2) Hanging bracket with mounting hardware
- Light Source: 384x .25W LEDs (128 red, 128 green, 128 blue)
- Beam Angle: 16°
- Strobe: Variable
- Color: RGB Color Mixing
- Control Protocol: DMX, IR Remote (not included)
- Operating Modes: DMX, Manual, Sound Active, IR
- IP Grade: IP20
Light Source Type: RGB LED
Light Source Wattage: 384x .25w
Minimum Beam Angle: 16.0°
Maximum Beam Angle: 16.0°
DMX Channel Modes: 4
DMX 3-Pin Connectors?: Yes
DMX 5-Pin Connectors?: No
Length: 38 in
Width: 2.5 in
Height: 6 in
Weight: 4.5 lb
Voltage Range: 100 - 240 VAC 50/60Hz
Maximum Wattage: 72w
Power Cable Connector - Fixture Side: IEC
Main Power Connector on Included Cable: Edison