Skip to product information
1 of 7

EVO Pixels 12v xConnect (All Sizes)

Regular price
Regular price
Sale price
Shipping calculated at checkout.
Vendor: Mattos Designs

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Meta Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa
Size: 100 Pixels


Caret Down

Pre-Order: Pixels will deliver in June, if you are able to purchase, then it's in stock for June shipment :)

We have always loved Mattos Designs pixels because they are highly reliable, really great quality pixels at an affordable price. 

The EVO pixel takes it to a whole new level by introducing a native 12v pixel that performs on par with standard bullet pixels in terms of brightness and power, and exceeds the typical bullet pixel in terms of user-friendliness. 

Say goodbye to hurt fingers and bulky pixels that stick far out of your props!   The EVO fixes all of those problems and more, also eliminating the pesky voltage regulator or resistor that standard 12v pixels have.  They are easier to push, easier to store, and they look really cool too! 

From The Manufacturer:

The EVO pixel from Mattos Designs is a brand-new take on a classic 12mm pixel.  This patent pending exclusive design features many enhancements to make a better and more durable pixel.  The internal led assembly is a native 12-volt ws2811 chip/led combo meaning there are no additional support components on the circuit board – this provides less possible failure points and exceptional power efficiency.  Rated at very low 8ma each, the low current requirements mean a thinner wire to achieve incredible pixel counts before requiring power injection. 

It takes 12 EVO pixels to equal the power consumption of just (2) 12mm bullet pixels.   The EVO uses power differently vs traditional bullet pixels.  Since the pixel does not rely on external components (resistors or regulators) to drop voltage to a usable level - this design requires higher voltage at each pixel - and brightness levels do not greatly affect current draw - this means that pixel counts of 250 and above will benefit from power balancing.   The entire board and wire assembly is epoxy coated and then it is over molded into our patent pending PVC shell.  This provides 2 complete sealed units within the pixel for incredible water and environmental resistance.  The led package is UL listed and our EVO pixel retains that listing and has been separately UL certified as a pixel string.

The installed pixel face sits flush with 10 mm coroplast props and has 2 nubs that are 90 degrees from the wire entry and exit points on the totally flat back.  Inserting into coroplast props from the larger suppliers is effortless as the nubs pass through the relief holes in the coroplast and once fully inserted, the pixel is lightly twisted to lock it in place.  Removal is this process in reverse.  Insertion into pixel strip is also improved as our 12mm shell is very slightly tapered to provide a firm but easier push to secure into strip - the flat back makes this process much easier on your hands.  The EVO pixel is pushed TO the nubs in this case.  Your props can be stored in less space, can be mounted flat, and can easily be double sided with this evolution in pixel design.  EVO Pixels can be used with coroplast that does not have notches in the 12mm cutout - but extra effort is required to push the nubs through the back layer to allow the face to sit flush with 10mm props.

With its incredibly light weight of 238 grams / 100 (@4” spacing) your props will become significantly lighter and easier to hang.  A 1,000-pixel high density prop using EVO’s weighing 11.25 lbs. less (5.25 lbs. / 1,000 EVO vs 16.5 lbs. 1,000 12v Bullets).

The brightness rivals bullet pixels, featuring a full 12mm of illuminated surface (vs 8mm for a bullet pixel), side and rear illumination, and simplicity of insertion and storage – EVO Pixels are revolutionizing displays around the world and improving the show building experience.  Each EVO Pixel is marked on the back with "+ Data -" to indicate the input side of the pixel in the event the user wants to customize a string or a repair is required.  A 3-year warranty is standard for all unmodified / uncut pixel strings.


  • 12V DC Voltage – native, no on-board resistors or regulators required

  • Safe to use with HP common slot power supplies (~12.5 v)

  • WS2811 Protocol

  • 4 inch spacing or 2.25 inch spacing (perfect for Megatree strip or dense props)

  • 4 inch spacing is available in a single 200 Count, a single 100 Count, TWO 50 Count, or FOUR 25 Count packages.

  • 2.25 inch spacing is available in our special EIGHT string 100ct MegaTree Kits with either a standard 4-inch lead – or – a 2-meter lead on each strand.  Perfect for extensionless hookup to your controller.

  • IP67 Rated – encapsulated PCB and wire – further encapsulated in a patent pending PVC shell

  • xConnect Pigtails

  • UL Listed, CE, RoHs and FCC Certified

  • 10 strand Black Wire standard

All Mattos Designs EVO Pixels carry a 3-year warranty from the time of purchase. The warranty is not valid for products that have been modified, cut, spliced or otherwise changed from their original form - including the tag on the wire.

Tech Specs

EVO Pixels 12v xConnect (All Sizes)
EVO Pixels 12v xConnect (All Sizes)
Caret Down

Recommended products

Recently viewed products